广东厂家直销DX系列卧式混合搅拌机

卧式混合搅拌机
概述Brief introduction
螺条式混合机连续式螺条用于中心出料，较普通的设计，能迅速达到混合的效果，外部的螺条将物料移到中心位置，内部的螺条将物料推到端部，两者使物料做辐射状运到。机盖--按照用户要求及工艺状况，机盖可设计成平盖，拱形盖，可设计为整体开启方式，也可以设计几片开启方式，手动或者气动开启，机盖上按需要开具各种管口。广泛应用于制药，食品，精细化工，石油化工，农药，涂料，化妆品，塑料，颜料，饲料等工业。
Continuous screw of screw mixer is used for central discharging. The most common design can quickly achieve the effect of mixing. The external screw moves the material to the central position, while the internal screw pushes the material to the end. Both of them make the material to be transported radially. Cover - According to user requirements and technological conditions, the cover can be designed as flat cover, arch cover, can be designed as a whole open mode, can also be designed several open mode, manual or pneumatic open, the cover can be opened according to the needs of a variety of pipes. It is widely used in pharmaceutical, food, fine chemical, petrochemical, pesticide, paint, cosmetics, plastics, pigments, feed and other industries.

性能Performance
1.适用范围广，可进行粉体与粉体，粉体与液体的混合。也可用作反应设备，干燥设备；
2.混合均匀性好，能使1:10000配比的物料均匀混合，尤其是对不同比重的物料混合更显优势；
3.混合过程温和，破碎性小；
4.经特殊设计，设备符合GMP标准要求
5.混合速度快，效果高
6.装载系数大，能耗小
7.出料快，方便，通常2-5分钟出完一批料
8.设备运转平稳可靠，损耗件少，使用寿命长，维修方便，操作简单。
1. It can be used for mixing powder and powder, powder and liquid. It can also be used as reaction equipment and drying equipment.
2. The mixing uniformity is good, which can make the material of 1:10000 mix evenly, especially for the material of different specific gravity.
3. The mixing process is mild and the fragmentation is small.
4. Through special design, the equipment meets the requirements of GMP standard.
5. The mixing speed is fast and the effect is high.
6. Loading coefficient is large and energy consumption is small.
7. Quick and convenient discharging, usually 2-5 minutes to complete a batch of materials.
8. The equipment runs smoothly and reliably, with less wear and tear, long service life, convenient maintenance and simple operation.